New Concept Spares

Robs R/C Heli Spares Radio Controlled Helicopter Parts and Accessories | Concept Spares | New Concept Spares

H3321 Main Shaft - Concept 32/46VR Main shaft for the Concept 32 & 46VE H3321 Price: £10.00 Quantity:	H3050 Tail Centre Hub H3053 Tail centre hub Price: £6.00 Quantity: 1

H3025 Counter Shaft 32/46VR H3025 Counter / Secondary Shaft for Concept 32 / 46VR Price: £7.00 Quantity: 1	H3512 Fuel Tank Concept 32 / 46R H3512 fuel tank for Concept 32 / 46VR Price: £12.50 Quantity: 1

H3123 Tail Pitch Lever Set H3123 Tail pitch lever set. Rare part. Only one available Price: £10.00 Quantity: 1	H3066 Tail Linkage Set H3066 tail linkage set for the Concept 30 Price: £7.00 Quantity: 1

H3510 Engine Mount 46VR H3510 Engine Mount for Concept 46VR Price: £15.00 Quantity:	H3323 Pitch Rod Guide 32/46VR H3323 Pitch rod guide for the Concept 32/46VR and Nexus range Price: £5.00 Quantity: 1

H3240 Concept 30 SX Stabilizer Seasaw H3240 Concept 30 SX Stabilizer Seasaw Price: £8.00 Quantity: 1	H3034 Secondary Shaft Bearings H3034 Secondary shaft bearings Price: £10.50 Quantity:

H3119 Main Shaft Concept 30 SR/SRX/ Main shaft for Concept 30 SR/SRX H3119. four availale brand new just not in the packet Price: £9.50 Quantity: 1	H3065W Concept 30 Landing Skid Braces Pair of landing skid braces for Concept 30 H3065W Price: £12.00 Quantity:

H3248 Hardened Bevel Pinion Gear H3248 Hardened bevel pinion gear for Concept 30. Price: £15.00 Quantity:	H3237 Special Hiller Control H3237 Special Hiller Control Price: £14.00 Quantity: 1

H3102 Concept 30 SE Mixing Lever Set H3102 Mixing lever set for Concept 30SE Price: £12.00 Quantity:	H3022 Concept 30 Engine Mount H3022 Concept 30 Engine Mount Price: £10.00 Quantity:

H3113 Stabilizer Seesaw Concept SE, SR H3113 Stabilizer seasaw Concept 30 SE, SR Price: £6.00 Quantity: 1	H3017 Pitch Rod Guide H3017 Pitch rod guide Price: £2.00 Quantity:

H3241 Thrust Bearing Set H3241 Thrust bearing set Price: £10.00 Quantity:	Tail Pitch Lever Kit - Concept 30/32/46VR Tail pitch lever kit for Concept 30, Concept 32 & 46VR and Nexus 30. As you know, the black and white mixer arms often break in a crash on these helis. As a result they are obsolete and discontinued. Rob has designed a new back end to replace the old unit. All parts are fully available. The kit contains:- tail pitch slider with bearings tail output shaft tail rotor hub blade grips and bearings (The blade grips take the original 5mm blades - not supplied) all grub screws, pins and C clips. Assembly required. Price: £28.00 Quantity:

1 2 3 4